video thumbnail

Vascular Compliance

Duration: 08:34

Write A New Comment

0 Comments

This video presents: Concept of compliance or capacitance or distensibility A comparison is also made to the elastance (opposite mechaism)

 

STUDY NOTES:

HEMODYNAMICS – VASCULAR COMPLIANCE

Capacitance is defined as the distensibilty of a blood vessel. In other words, capacitance is the ability of an object to get stretched. In contrast, elasticity is defined as the object's ability to recoil or return to its previous shape after beingstretched. Elastance is produced by elastin fibers present in the vascular wall. Take for example the aorta; it has the most layers (around 50 layers) of elastin fibers in its tunica media which makes it the most elastic blood vessel in the body. If the aorta is compressed or stretched, it will recoil back to its normal shape.

Compliance of a vessel is the opposite of its elastance. The veins are said to be compliant because if you keep increasing the volume of blood in the veins, their walls will distend allowing for more blood to be accommodated.

Arteries and veins possess relative percentage of both, elasticity and compliance. However, arteries are said to berelatively more elastic and less compliant owing to the fact that they have more elastic fibers. This explains why the aorta resists distension when blood at high pressure is pumped into it by the heart. The increase in pressure causes a small stretch in the wall (due to compliance) of aorta which is immediately diffused as the aorta recoils back (due to elasticity) to its original shape. Greater the amount of elastic tissue in a vessel wall, the higher is the elastance, and the lower is the compliance of the blood vessel. As the person’s age increases, the arteries become stiffer and further lose their compliance. Pathological conditions such as atherosclerosis also further decreases the arterial compliance. 

The opposite is true for the veins. The walls of the veins, being very compliant, will keep on stretching as more blood is added to the veins. There will be a small degree of recoil as well but the resultant force is not as strong as that in the arteries.Formulae:

➢ Compliance = Volume (ml)/ Pressure (mm Hg)

As seen in the formula, compliance can be written as a ratio of volume and pressure. This shows that more compliant vessels will allow more volume of blood to be added without causing any changes in pressure. On the other hand, the arteries try to resist changes in volume by generating more pressure as they are less compliant. This is the reason why the volume of blood in arteries is called stressed volume whereas the volume in veins is called unstressed volume. . Systemic veins are 20 times more compliant relative to systemic arteries. Due to this, the veins easily distend in response to high volumes of blood. Because of their ability to capacitate, the veins accommodate roughly 70% of the systemic blood volume. For this reason the systemic veins are a major blood reservoir of the body.

 

 

 

The table below contrasts the different properties of arteries and veins and the effect they have on hemodynamics. The result are further explained below:

 

                    Arteries​

                     Veins

Compliance (Distensibility)

 

                      +

                     +++      

Elastance (Recoil ability)

                    +++   

                       +

Stress

                    +++

                       -

Volume

                      +

                   +++++

Pressure

                   +++

                       +

 

• Compliance: Arteries are less compliant and veins are more compliant.

• Elastance: The arteries are more elastic. This property makes up the basis for “ windkessel effect” in the aorta. The aorta distends in response to the high pressure blood pumped by the heart and recoils back thereby maintaining the pressure between 120/80 mm Hg. The elastance of veins is low.

• Stress: The arteries face stress as the blood running in them is at high pressure. The stress on the walls of the veins is negligible.

• Volume: The arteries are not capable of housing large volumes of blood. The veins have more capacity as they are more distensible and compliant in the face of volume changes.

• Pressure: The pressure in the arteries is greater than that in the veins. Arterial wall recoils due to presence of elastic fibers, and this recoil is responsible for the arterial pressure. Veins on the other hand don’t have that much of an elastic component and therefore lack recoil ability and consequently the blood pressure is relatively low in the veins. 

• Flow: The flow is equal in both, the arteries and the veins, as the blood is flowing in a closed circuit. As the blood moves in a closed circuit, the flow is equal at all points. 

COMPLIANCE GRAPHS FOR VOLUME VS PRESSURE

X-axis = Volume (mL)

Y-axis = Pressure (mm Hg)

The graphs in the lecture compare the compliance of aorta with that of systemic veins. For understanding purpose, compliance can be referred to as the pressure change in the blood vessel when unit volume of blood is added to the vessel (aorta or the veins). The compliance of each vessel can be calculated as the gradient of the graph at any point.

Compliance = ΔV/ΔP

 

For Aorta, when unit volume of blood is added to it, there’s a significant rise in its pressure. The gradient of the volume vs. pressure curve is relatively less steep. This suggests that the aorta has a low compliance. Increase in pressure can also be explained by the greater recoil (elastance) of the aorta.

For veins, when blood is added to them, there’s no significant change in pressure. The gradient of the volume vs. pressure is very steep, which suggests that their compliance is very high. The veins can hold greater volume of blood without any increase in their pressure because they are very distensible.However, as we continue to add blood, there comes a point when the curve starts to flatten out and the vein cannot accommodate any more blood. The compliance at this point is zero. 

 

In this video we will learn about :

1. Definition of compliance. 

2. Compliance vs elastance.

3. Formula for compliance calculation.

4. Compliance in arteries and veins.

5. Graphical representation of compliance in blood vessels. 

Following answers are created by ChatGPT. Occasionally the answer may be harmful, incorrect, false, misleading, incomplete, or limited in knowledge of world. Please contact your doctor for all healthcare decisions. Also, double check the answer provided by the AI below.

Faculty

In addition to the presenter, following authors may have helped with the content writing, review, or approval:

  • Dr. Mobeen Syed

CME, CE, CEU and Other Credit Types:

ACCME Accreditation Statement
The DrBeen Corp is accredited by the Accreditation Council for Continuing Medical Education (ACCME) to provide continuing medical education for physicians.

AMA Credit Designation Statement
The DrBeen Corp designates this enduring material for a maximum of 0.25 AMA PRA Category 1 Credits™. Physicians should claim only the credit commensurate with the extent of their participation in the activity.


Disclosure Information

In accordance with the disclosure policies of DrBeen Corp and the ACCME (Accreditation Council for Continuing Medical Education), we are committed to upholding principles of balance, independence, objectivity, and scientific rigor in all of our Continuing Medical Education (CME) and Continuing Education (CE) activities. These policies include the careful management and mitigation of any relevant financial relationships with organizations that are not eligible.
All members of the Activity Planning Committee and presenters have disclosed their relevant financial relationships. The DrBeen Corp CE Committee has thoroughly reviewed these disclosures and determined that these relationships are not deemed inappropriate in the context of their respective presentations. Additionally, they are found to be consistent with the educational objectives and the integrity of the activity.

Faculty Disclosures
Dr. Mobeen Syed Author declares no conflict of interest.

Instructors

Dr. Mobeen Syed

Dr. Mobeen Syed

Mobeen Syed is the CEO of DrBeen Corp, a modern online medical education marketplace. Mobeen is a medical doctor and a software engineer. He graduated from the prestigious King Edward Medical University Lahore. He has been teaching medicine since 1994. Mobeen is also a software engineer and engineering leader. In this role, Mobeen has run teams consisting of hundreds of engineers and millions of dollars of budgets. Mobeen loves music, teaching, and doing business. He lives in Cupertino CA.

Please login to access this content.

Don't have an account?

Start Your Free trial

No credit card information needed.

Cardiovascular System

Related Videos